Basic Info.
Certification
CE, CB, RoHS, SASO
Membrane Type
Polyyamide Thin-Film Composite
pH Rang Short -Term Cleaning(30min)
1-12
Minimun Concentrate Flow Rate
4* Permeat Flow
pH Range Continuous Operation
2-11
Max Operation Pressure
300psi(21bar)
Maximun Feed Rate
2.0gpm(7.6lpm)
Product Description
What's Reverse Osmosis?
Reverse osmosis is a filtration process that is often used for water. It works by using pressure to force a solution through a membrane, retaining the solute on one side and allowing the pure solvent to pass to the other side. This is the reverse of the normal osmosis process, which is the natural movement of solvent from an area of low solute concentration, through a membrane, to an area of high solute concentration when no external pressure is applied.
AMFOR reverse osmosis membrane elements for home drinking water are the most reliable. Advanced membrane technology and automated fabrication allow these elements to keep consistent performance and suitable for long distance transportation. AMFOR home drinking water elements are rated at 50psi and will purify about 20% more water than competitive elements rated at 60psi (please see the datasheet for more information)
| Product | Product | Water | Flow Rate | Minimum Salt | Stabilized Salt |
| (gpd) | (m3/d) | (lph) | Rejection Cl-(%) | Rejection Cl- (%) |
| TW30-1812-24 | 24 | 0.09 | 3.8 | 96 | 98 |
| TW30-1812-36 | 36 | 0.14 | 5.7 | 96 | 98 |
| TW30-1812-50 | 50 | 0.19 | 7.9 | 96 | 98 |
| TW30-1812-75 | 75 | 0.28 | 12.0 | 96 | 98 |
| TW30-2012-100 | 100 | 0.38 | 15.8 | 96 | 98 |
| TW30-2812-150 | 150 | 0.57 | 23.7 | 96 | 98 |
| TW30-2812-200 | 200 | 0.76 | 31.6 | 96 | 98 |
| TW30-3012-300 | 300 | 1.14 | 47.4 | 96 | 98 |
| TW30-1810 (Disposable element) | 50-150 | 0.19-0.57 | 7.9-23.7 | 90-96 | 90-98 |
| Permeate flow and salt rejection based on the following test conditions: 250ppm softened tap water, 77 F(25 deg C), PH=8, and 15% recovery and the specified pressure at 50psi. |
| Permeate flow rates for individual elements many vary +/-20%. |
| For more information, please consult with AMFOR. |
Dimensions-Inches(mm)
| Product | A | B | C | D | E |
| TW30-1812-24 | 11.74(298) | 0.87(22) | 0.68(17) | 1.75(44.5) | 10.35(263) |
| TW30-1812-36 | 11.74(298) | 0.87(22) | 0.68(17) | 1.75(44.5) | 10.35(263) |
| TW30-1812-50 | 11.74(298) | 0.87(22) | 0.68(17) | 1.75(44.5) | 10.35(263) |
| TW30-1812-75 | 11.74(298) | 0.87(22) | 0.68(17) | 1.75(44.5) | 10.35(263) |
| TW30-2012-100 | 11.74(298) | 0.87(22) | 0.68(17) | 1.75(44.5) | 10.35(263) |
| TW30-2012-150 | 11.74(298) | 0.87(22) | 0.68(17) | 1.75(44.5) | 10.35(263) |
| TW30-2812-200 | 11.74(298) | 0.87(22) | 0.68(17) | 3.00(76.2) | 10.00(254) |
| TW30-3012-300 | 11.57(294) | 0.87(22) | 0.84(21.3) | 3.00(76.2) | 10.00(254) |
| TW30-1810(Disposable element) | 10.00(254) | 0.87(22) | 0.67(17) | 1.75(44.5) | 8.5(216) |
| Membrane Type...Polyamide Thin-Film Composite |
| Maximum Operating Pressure...300psi (21bar) |
| Maximum Feed Rate...2.0gpm (7.6 lpm) |
| Minimum Concentrate Flow Rate...4 × permeate flow |
| pH Range Continuous Operation a ...2-11 |
| pH Range, Short-Term Cleaning(30min)...1-12 |
| Maximum Operating Temperature...113 F (45 deg C) |
| Maximum Feed water Turbidity...1 NTU |
| Maximum Feed Silt Density Index...5 |
| Free Chlorine Tolerance c...< 0.1ppm |
| a Maximum temperature for continuous operation above pH 10 is 95 (35 deg C). |
| b Refer to Cleaning Guidelines of ANDE-AMF. |
| Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, AMFOR |
| recommends removing residual free chlorine by pretreatment prior to membrane exposure. Please refer to technical bulletin ANDE-AMF for more information. |
Address:
16-a Ronghui Park Area B, Beijing Airport Industrial Zone, Shunyi District, Beijing, China
Business Type:
Manufacturer/Factory
Business Range:
Chemicals, Electrical & Electronics, Health & Medicine, Manufacturing & Processing Machinery
Company Introduction:
Ande Membrane Separation Technology and Engineering (Beijing) Co., Ltd. is the wholly-owned subsidiary of AMFOR INC USA. Since its establishment in 1997, we have always been committed on membrane separation research and development. Currently, we manufacture RO, NF, UF, MF, Anode Cell Membrane and MBR flat sheet membrane. Besides, we have successfully developed Fouling Resistant membranes and Alkali-Resistant membrane. Our products have been widely used in Electro-coating, Biological industry, Pharmaceutical industry, Food & Beverage, Water treatment etc. Our ISO management system guarantees the best quality of our products and service. Original Beautiful life is from Ande Membrane!
){kind=link}